| Title |
Publisher |
Price ▲ |
One side of these 3D printable coins has a 20 embossed on it (for Advantage in 5e).
The other side of these 3D printable coins has a 1 embossed on it (for Disadvantage in 5e).
File set prints a set of 6 coins, enough for a DM and 5 players. Keep track of (dis)advantage, critical hits/failures, etc.
Coins are 1" wide and roughly 1/8" thick. Don't require primer unless you're feeling the groove.
My... [click here for more] |
Menagerie Press |
Pay What You Want
|
A dream a night is all he visits... but those he visit often end up dismembered, broken, shattered... or dead. Usually dead. But if you do survive the horror.... your life will never be the same.... trust me....
Krannaou came about because a good friend of Will's was looking for some evil to write lore for, and here he be our first devil.... Krannaou Dreamhaunt.
Comes with resin supported wings version... [click here for more] |
Aether Studios |
$1.00
|
This is the core floor terrain set for the Atlantis series. It contains 26 2×2 tiles, 10 2×4 tiles, and 20 4×4 tiles all themed with Coral features compliments of the Smithsonian Institute. Our patrons voted for more Atlantis and this set was revised and expanded during the April 2022 production run.
... [click here for more] |
Aether Studios |
$1.00
|
This miniature, Skull Taker, was sculpted by Nasos Maloudis and remixed by Will Walker. It is a reward for the backers of Explore Dungeons #1, a Kickstarter from our long time friend, patron, and backer Chris G. Williams. Skull Taker is featured in one of the adventures in this spectacular eZine and we are very pleased to bring him to life. We later released this as a patreon reward to our amazing... [click here for more] |
Aether Studios |
$1.00
|
Ru Kalaat is the Champion Standing at the Seat of Spirits. This fortress town is deep in the north west of Aach'yn where many races and tribes come to barter and trade. Ru has no desire for leadership, but enjoys the lavish life of the throne. Ru delegates as much of the town leadership as he can, and prefers spending his days hunting and chasing bed warmers. ... [click here for more] |
Aether Studios |
$1.00
|
D. Troit is a hard working Dwarf, even by their own standards. He is widely considered among the greatest actors of his generation and known for giving every role his whole range of talents. He also is a powerful bard and enjoys adventuring and questing, all the better to tap the font of mortal existence.
Should you come across him, pay him for his performance should it catch your gaze. Otherwise... [click here for more] |
Aether Studios |
$1.00
|
Totu has been our heroic guide for 3 Kickstarter projects and will continue to serve faithfully for the foreseeable future. When Carl asked what he could make to help fill out the lore of the World of Aach'yn, our thoughts went instantly to fact that behind most successful people are their supportive partners. We really wanted reflect that with a great partner for our beloved swamp guide. We all hope... [click here for more] |
Aether Studios |
$1.00
|
Once a humble farmer and rancher of peaceful taurite mounts, Vanya Condioso is a man on a mission. Cultists of Zol'Tigan came across his farmstead while Vanya was wrangling the herd. When he returned to the burned out hovel he found his wife dead and son taken. Making a pact with a vengeance demon, Vanya set out to find his son and to deliver the souls of the guilty in to his new master. This miniature... [click here for more] |
Aether Studios |
$1.00
|
The World of Aach'yn is our diverse game world based on Will's home campaign. Chunks of broken planet that exist outside of time. A wizard of unrivaled power who rules his domain with an uncontested fist. Adventure in the sky above, the sands below, and the intersection of a shattered universe. The World of Aach'yn is a place where paupers can become pirates, nobles trade wealth and safety for adventure,... [click here for more] |
Aether Studios |
$1.00
|
Vilmos Tartalan , The Grenadier Mage of Clan Tartalan is old friends with danger. Blessed to be born into a high clan, his natural magical talent was given every advantage of schooling. He is a triple threat on the battlefield: A natural arcane caster, A master mixer of all things alchemical, and a Magic-Tech specialist of the highest order. All the rumors about his former career as a spy are just... [click here for more] |
Aether Studios |
$1.00
|
The tribeless orc vagabond who travels from town to town playing violin and breaking hearts. ... [click here for more] |
Aether Studios |
$1.00
|
Tolvas Arkheart is not a great fiddler player, but he plays with the confidence of a world class artist. He uses mass quantities of ale to facilitate this transformation, funded by the vast wealth of his clan and their merchant and trade guilds. Tolvas is not a complex man, he knows a great many secrets about his house, and is surprisingly good at keeping them. Perhaps your party will find a way to... [click here for more] |
Aether Studios |
$1.00
|
When you are looking for a desert guide, there is no one better equipped to get you through the silt-seas of Aach'yn than Kesa Tartalan.
Nasos Maloudis sculpted up this model. Kesa is a desert guide extraordinaire. She knows every back trail, every danger, and every shortcut across the silt seas.
This model prints completely without supports on FDM Machines.
... [click here for more] |
Aether Studios |
$1.00
|
Included in this set of terrain you will find 36 remixed Aztlan and FDG-Dungeons tiles. There are also 4 development files for additional remixing by other artists.
... [click here for more] |
Fat Dragon Games |
$1.00
|
This set of 3D-printable STL files, Cracked Marble Floors, came from a request on the Fat Dragon Games Forums. I didn’t think it would work, but it did. I tried to think of a walls set that would fill out the set, but I couldn’t find the the right fit. So, here is a big set of floors; see the related sets below for some clip-on walls that will work well with them.
Recommended Print... [click here for more] |
Aether Studios |
$1.00
|
This set, Cracked Marble Floors, was a request on the FDG Forums. Will didn’t think it would work, but it did. Will tried to think of a wall set that would fill out the set, but he couldn’t find the right fit. So we just release the floors to start with. Eventually, Colin figured out some good walls to match. This set has been updated with them and as always we welcome your requests. The template... [click here for more] |
Aether Studios |
$1.00
|
Create elaborate hedge mazes with these 3D-printable STL files. This Hedge Mazes set includes walls, posts, corners, arches, and a gate paired with both a natural ground style and a Herringbone style brick floor that you might find in the Hedge Maze behind a Lord's manor.
These tiles are compatible with all DragonbiteTM terrain.
Recommended Print Settings:
Layer Size: 0.15mm,... [click here for more] |
Aether Studios |
$1.00
|
The Alien Lair Core Set is the main building block set of the Alien Lair series. Included in this set are the walls, corners, curve walls, and other models needed to make full, diverse alien lair dungeons. The origins of this set go back to 2017 when Colin Christenson released the Alien Space Ship set on the Dragonbite Community Creator. That set featured exceptionally clean and beautiful lines, so... [click here for more] |
Aether Studios |
$4.79 $1.00
|
This miniature from Aether Studios master sculptor Nasos Maloudis is sure to bring nightmares to your players. This model prints without supports and is on a 50mm base. ... [click here for more] |
Aether Studios |
$1.00
|
Miniature comes both supported and unsupported, on bases. Supports done with Lychee and a save file is included for easy changes. ... [click here for more] |
Aether Studios |
$1.00
|
Seraphim is our “Greco Roman Marble/Granite” style terrain for temple style dungeons and structures. It is built on top of the Dragonbite base with a 1 inch grid for interoperability with other tile-sets. Every 2x2 tile has space for LEDs using our LED Slot. This core set includes all the basics you need to get started building a classic marble temple. Floors, Walls, Corners, Stairs, – everything... [click here for more] |
Aether Studios |
$3.19 $1.00
|
The Seraphim line of 3D-printable Angelic terrain will be featured in our World of Aach’yn module series as the home of Heroticus. Heroticus is the most active deity on Aach’yn and his domain is literally “kicking ass” as in he or his angels will show up when there is a good fight about to happen, or if a good fight needs to be happening.
This expansion set includes pillars, pools, secret... [click here for more] |
Aether Studios |
$7.99 $1.00
|
An Alchemist's Set.
The Zip contains 3 files.
One includes the alchemist's chemistry set
the two others files are potions and poisons.
Check out the kickstarter this came from if you haven't already backed. ... [click here for more] |
Devious Games |
Pay What You Want
|
The Banning Class Bi-Plane was sculpted by Colin Christenson late in the campaign as a tribute to the first non-stop transcontinental flight performed in 1932 by James Banning and Thomas Allen. James and Thomas were the first African-American pilots to fly across the continental United States. James was passionate about flying in an era when everyone told him to stop dreaming. The spirit of those who... [click here for more] |
Aether Studios |
$1.00
|
This is a 4 inch by 6 inch building for use in wargaming or RPGs (28mm scale). The building has detailed interior space.
To mount this building on a Dragonbite base, download the free base files from https://www.drivethrurpg.com/product/279771/Bases-for-Buildings ... [click here for more] |
3dprintcraft |
$1.00
|
Multiple Flyers and Bases for you to use in game of Battletech, Polyversal, or other 6mm/8mm scale tabletop wargames.
nonPareil institute is committed to building better futures for adults with autism through technical and work-readiness training and social engagement activities. These 3d models were created by former nonPareil Institute students and staff members who help other adults on the autism... [click here for more] |
nonPareil |
$1.00
|
In this pack you will find multiple bases (Ruble, Rock Cliff, Sandstone, Rough Sand, Broken Concrete, and Mud), two large 7-hex terrain pieces (Mountain, Mesa), and also five buildings / objectives (Turbine Generator, Infantry Drop Pod, an ICBM, Cooling Towers, and a Refinery). All models, except the 7-hex terrain pieces, come in supported, un-supported, based, un-based versions. These models will... [click here for more] |
nonPareil |
$1.00
|
In this pack you will find six new textured bases, five buildings, three 7-hex terrain pieces, and two nuclear explosions. Each model in this pack comes with supported versions.
These models can find a great home in your games of Battletech, AT, Polyversal, or any other 6mm/8mm sci-fi tabletop wargame.
Some models created through use of Standard License with Oleg Ushenok.
One or more textures on... [click here for more] |
nonPareil |
$1.00
|
In this pack you will find five Tanks and two styles of Power Amror, and a hex base. Each style of Power Armor comes in three poses and the jumping/flying pose has three different smoke effecs to choose from (thin, thick-short, and thick-tall). Each model in this pack comes with supported versions.
These models can find a great home in your games of Battletech, Adeptus Titanicus, Epic 40K, Polyversal,... [click here for more] |
nonPareil |
$1.00
|
Bill requested some four inch doorways. Here are 4 variations. Regular Flat Wall, Left Corner, Right Corner, Two Corners. Each piece contains an optional center clip space, where you can run a narrow passageway off from it if you'd like. ... [click here for more] |
Fat Dragon Games |
$1.00
|
Buddy Cthuhlu, originally on Thingiverse by Kibilz, recut for proper printing with his own custom 4x4 FDG base. Also included is a 4x4 version of the tile for any of your own ideas. This model prints in 3 sections, so that you only have to use supports for the Buddy C top portion.
This tile is a compliment to the Lovecraftian set of terrain.
Please enjoy this free model, and consider supporting my... [click here for more] |
Fat Dragon Games |
$1.00
|
Another resquest from my friend Lou. Castle Wall with Stairs and Crenellations. This is just thr top piece. it is meant to go with the castle set from Fat Dragon Games.
Dragonbite clips can be found here:
www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20
Recommened Settings:
Layer Height: 0.2mm or less
Infill: 10%,... [click here for more] |
Fat Dragon Games |
$1.00
|
Celtic Table (STL 3D Printing Model File)
This table with a decorative engraved top is perfect for taverns, inns, and manors. A nice basic addition to your fantasy gaming 3d printing needs.
The preset dimensions for this file is 48x28x19mm. The table is flipped upside down for easier printing. Feel free to adjust it as needed when you load the file into your favorite slicer program... [click here for more] |
Fishwife Games |
$1.00
|
This set of 3D-printable STL scatter terrain was sculpted by Jacob Armour in celebration of the holidays. Everything you need to give your players a very Merry Christmas!
Recommended Print Settings:
Layer Size: 0.15mm, or 0.10mm for smoother features
Infill: 10% recommended
Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm)
Side... [click here for more] |
Aether Studios |
$1.00
|
Crawling Blob (3D Print File) You gasp in horror at the bubbling, pulsating mound of slime creeping towards you. Though amorphous in form the ooze exhibits a locomotion that mimics a humanoid figure crawling in horrid agony on the floor.... could this thing have been once human?!?
The overall shape of the crawling blob adds a bit of a twist to the regular slime monster. Perfect for horror, weird fiction,... [click here for more] |
Fishwife Games |
$1.00
|
This product contains one .stl files for a crenelated castle square corner adaptor for use with the Fat Dragon Games Castle Starter Set.
This product was created under license, Dragonbite Community Creator, Dragonlock, and Drgaonbite are trademarks of Fat Dragon Games in the U.S.A. and other countries.
This work contains material that is copyright Fat Dragon Games and /or other authors. Such material... [click here for more] |
Fat Dragon Games |
$1.00
|
Crystal Mound: 3D print file A mound of mineral crystals for your fantasy, sci-fi, or mutant ttrpg. This is a pay what you want deal.
Default Scale: 30x30x34.2mm ... [click here for more] |
Fishwife Games |
Pay What You Want
|
Deployable Cargo is a small collection of science fiction containers for 3D printing. They have been designed to print easily and work well with figures for Corvus Belli's Infinity, Games Workshop's Warhammer 40,000, and many other games. The three larger pieces make great standalone scatter terrain that can be painted up and thrown on the table very quickly, while... [click here for more] |
Rocketship Games |
$1.00
|
Those little buggers! These sets of tokens are for Size -2 (Small), Size -3 (Very Small), and Size -4 (Tiny).
These are numbered Tokens (in various shapes noted below) 3D print files designed for compatibility with Savage Worlds to be used as Extras.
You will be getting 3D STL digital files to print your own models.
Included for this purchase are the following files:
Triangle (Small)... [click here for more] |
Pinnacle Entertainment |
$1.00
|
This is a .zip file containing the .stl files for the Doge Vandire miniature. The price is set to Pay What You Want which means it can be free or it can be 10 grand you decide. There are models for a basic mini, a mini sitting on a throne and models for the parts seperated out. Some issues may appear but those are largely visual and disappeared when I sliced the models.
... [click here for more] |
Owlsthirdeye |
Pay What You Want
|
Use these stencils for quick and easy airbrush painting ! These stencils are compatible with walls from the legacy "Timber & Stone Walls" set. Have fun ! Stencils included : - Gable L - Gable R - Wall A - Wall B - Wall C / Wall C 1 Window - Wall D / Wall D 1 Window / Wall D 2 Windows - Wall D with door Each stencil is available with 2 orientations : vertical with 2 sides cover, or horizontal... [click here for more] |
Fat Dragon Games |
$1.00
|
Use these stencils for quick and easy airbrush painting ! These stencils are compatible with walls from the legacy "Village Buildings 1" set. Have fun ! Stencils included : - Gable L - Gable R - Wall A - Wall B - Wall C / Wall C 1 Window - Wall D / Wall D 1 Window / Wall D 2 Windows - Wall D with door Each stencil is available with 2 orientations : vertical with 2 sides cover, or horizontal... [click here for more] |
Fat Dragon Games |
$1.00
|
Included in this release is the Dwarven Crusher "Big HANS" This mean machine has been engineered as a giant crushing vehicle perfect for arena deathmatches. The model is available as a single print or as two halves that clip together. This model was a reward for patrons of Aether Studios in March 2020.
Recommended Print Settings:
Layer Size: 0.15mm, or 0.10mm for smoother features
Infill:... [click here for more] |
Aether Studios |
$1.00
|
Fat Dragon's Realm of the Mountain King wall tile mixed with the Dwarven Brazier. I have also made a space to put the LED light frame found here,
https://www.drivethrurpg.com/product/309914/LED-Light-Frame--357-Cell
Fat Dragon's Realm of the Mountain King can be found here,
https://www.drivethrurpg.com/product/240135/DRAGONLOCK-Ultimate-Realm-of-the-Mountain-King ... [click here for more] |
Fat Dragon Games |
$1.00
|
The caverns needed better corners to work with water. So I made some.
DRAGONBITE™ Community Creator model.
For suggested print settings, please download the free Dragonlock™ Ultimate: Free Sample Set here: /product/197128/DRAGONLOCK-Ultimate-Free-Sample-Set
Download the free DRAGONBITE™ Clip model here: /product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20... [click here for more] |
Fat Dragon Games |
$1.00
|
Cyril Ronseaux's Fantasy Add-On supplement, Tomes & Prayers adds a few new sets of templates for Power effects. They are the Arc template (in Small, Medium, and Large sizes) and an increased-sized Blast Template... Huge. He has graciously allowed me to make these 3D files for sale so they can make it onto your table.
The arc templates are 45-degree angles from a center point reaching out to 2,... [click here for more] |
Pinnacle Entertainment |
$1.00
|
This STL files for 3D Printers creates a rolling pin with a flagstone pattern. Each flagstone should be about an inch long and half an inch wide. ... [click here for more] |
Impossible Emporium |
Pay What You Want
|
Game Tokens: Aim Status STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens:Ammo STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Arcade Coin STL This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Log In 
